There was some liquid or other that one applied to cork rod handles (to keep them looking nice and new) that I used to use, but whose name I now completely forget. Anyone aware of it?

U40 cork seal.

Apply a very thin layer. I put this on all my rod handles, slime and dirt just washes off, it improves grip and stops filler falling out of the handle.

Buy it here.

http://www.guidesnblanks.com/categor...ain_cat_ref=13

It is very watery, so apply conservatively.

The cork will darken slightly after application.

__________________
www.paypalsucks.com

I notice they sell U40 brush cleaner as well.

Is this needed to get U40 off the brush or will other stuff work, i.e. soapy water, turps., etc.??

Cheers

W

No, water will take it off the brush.

__________________
www.paypalsucks.com

Anyone know of a good cork filler to fill in the pits on a handle?

Could one then give it a rub down with a fine sandpaper and then coat as above posts suggest to get it looking 'new' again?

many thanks

SKB

__________________


**The SKB Website**


Tackle Essentials - Pliers, Snips, Pimps etc

Utterly Pimping Reel Porn


MrTrout's Furled Leaders


Help our Heroes



*Proud Sponsor of the EYFA and Pitsford Pirates*

http://www.harrisonrods.co.uk/blog/blog1.htm Steve is doing a bit in his blog about rejuvenating cork handles... maybe of use...

Soap and water only. Sealing the cork will stop it from breathing and drying out which could cause it to rot.

Sunkistbob, make up your own filler using cork dust and wood glue.

B.R.

Brilliant. Thanks.

I have been sealing cork handles for years and never had a problem. Sealing it, stops the filler falling out and the cork degrading. Slime and muck also washes off more easily.

You should always dry your rod with a cloth before putting it away, particularly if you have a metal rod tube.

__________________
www.paypalsucks.com