I have a 10' Mike Ladle Surespin spinning rod. The ceramic guides in the end ring are chipped causing chaffing to my line. How do I remove it and how do I make sure I get the correct replacement ?

Thanks for all advice

Tip rings are secured in place with "Hot Melt" glue.

Removal requires you to apply heat from a lighter to the tubular body of the ring to melt the glue so the ring can be twisted off the tip.

Sounds easy - and is easy - so long as you take it easy with the heat,it is made even easier if you have someone to lend a hand.

If you're flying solo I would suggest using a candle as your heat source leaving your hands free to hold the rod and twist the tip off when the glue has melted.

Putting a replacement requires you to heat the tip ring first.then apply a small amount of glue before sliding the ring onto the rod tip.

Given the heat involved, it might be an idea to wear a pair of leather gloves.

__________________

If you have problems finding the correct replacement try contacting Veals.

__________________

Thanks guys, I think I've found the one, from guidesnblanks.

Cheers