How close do you need to wrap to the end of the female ferrule.

Also should you wrap an couple of mil below the normall fit of the two on the male?

Thanks
AL

__________________

There is no set rule and everyone will do this differently, but about a good 1/2 inch onto the blank is a good standard.

Gary

Nicho Bamboo Rod Co

How close to the end of the black section should the wrap be

__________________

Hi RC,

No firm rule, I try and get within 1-1.5mm just leaving enough room for the lacquer to contact the blank itself...

Regs, V.

__________________
"Perfection will do"