Re: help please
Terry,
Split the spool section from the reel.
On the spool holder section, you will see a large washer secured by 2 small screws and a small pin poking through the washer. Gently and carefully loosen the 2 screws (there is a small spring behind this lot, so gently does-it).
Carefully lift the washer so that the pin that was protruding through the washer is covered by the inside face of the washer, and then gently rotate the washer away from the pin. Soon, another pin will pop it's head through the pin-hole.
Secure the screws, and re-assemble the two parts pf the reel.
You will now have reversed the winder.
Hope that helps
Aidan
|